#include <PubSubClient.h>

// MQTT server details
const char* mqtt_server = "xxxxx.cn";
const int mqtt_port = 1883;

PubSubClient client(espClient);

void callback(char* topic, byte* message, unsigned int length) {
  Serial.print("Message arrived on topic: ");
  Serial.print(topic);
  Serial.print(". Message: ");
  String messageTemp;
  
  for (int i = 0; i < length; i++) {
    Serial.print((char)message[i]);
    messageTemp += (char)message[i];
  }
  Serial.println();
}

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Attempt to connect
    if (client.connect("ESP32CAMClient")) {
      Serial.println("connected");
      // Once connected, publish an announcement...
      // and resubscribe
      client.subscribe("/cloud/mqtt/esp32_cam/subscribe");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}


void setup() {
  Serial.begin(115200);

  // setup_wifi;
  client.setServer(mqtt_server, mqtt_port);
  client.setCallback(callback);
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();
}

#include <WiFi.h>
#include <Wire.h>
#include <Adafruit_GFX.h>
#include <Adafruit_SSD1306.h>
#include <PubSubClient.h>

#define CAMERA_MODEL_AI_THINKER

#define SCREEN_WIDTH 128 // OLED display width, in pixels
#define SCREEN_HEIGHT 32 // OLED display height, in pixels

// WiFi credentials
const char* ssid = "xxx";
const char* password = "xxxx";



// MQTT server details
const char* mqtt_server = "xxxx.cn";
const int mqtt_port = 1883;

WiFiClient espClient;
PubSubClient client(espClient);

// Define I2C Pins for ESP32-CAM
#define I2C_SDA 14
#define I2C_SCL 15

// Declaration for an SSD1306 display connected to I2C (SDA, SCL pins)
Adafruit_SSD1306 display(SCREEN_WIDTH, SCREEN_HEIGHT, &Wire, -1);

void setup_wifi() {
  delay(10);
  // Connect to WiFi network
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);

  WiFi.begin(ssid, password);

  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }

  Serial.println("");
  Serial.println("WiFi connected");
  Serial.print("IP address: ");
  Serial.println(WiFi.localIP());

  // Display IP address on OLED
  display.clearDisplay();
  display.setCursor(0,0);
  display.println("WiFi connected");
  display.print("IP: ");
  display.println(WiFi.localIP());
  display.display();
}

void callback(char* topic, byte* message, unsigned int length) {
  Serial.print("Message arrived on topic: ");
  Serial.print(topic);
  Serial.print(". Message: ");
  String messageTemp;
  
  for (int i = 0; i < length; i++) {
    Serial.print((char)message[i]);
    messageTemp += (char)message[i];
  }
  Serial.println();

  // Display the incoming message on the OLED display
  display.setCursor(2,0);
  display.println("MQTT Message:");
  display.println(messageTemp);
  display.display();
}

void reconnect() {
  // Loop until we're reconnected
  while (!client.connected()) {
    Serial.print("Attempting MQTT connection...");
    // Attempt to connect
    if (client.connect("ESP32CAMClient")) {
      Serial.println("connected");
      // Once connected, publish an announcement...
      // and resubscribe
      client.subscribe("/cloud/mqtt/esp32_cam/subscribe");
    } else {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}


void setup() {
  Serial.begin(115200);
  
  // Initialize I2C
  Wire.begin(I2C_SDA, I2C_SCL);
  // Initialize OLED
  if(!display.begin(SSD1306_SWITCHCAPVCC, 0x3C)) { // Use the correct I2C address here (commonly 0x3C or 0x3D for 128x32 displays)
    Serial.println(F("SSD1306 allocation failed"));
    for(;;); // Don't proceed, loop forever
  }

  display.clearDisplay();
  display.setTextSize(1);
  display.setTextColor(SSD1306_WHITE);
  display.setCursor(0,0);

  setup_wifi();

  

  client.setServer(mqtt_server, mqtt_port);
  client.setCallback(callback);
}

void loop() {
  if (!client.connected()) {
    reconnect();
  }
  client.loop();
}